Evenflo Advanced Breast Pump | Review, tutorial, and set up – 2025 breast pump review!

Let’s dive into the Evenflo Advanced Double Electric Breast Pump. I see this one pop up a lot, especially as a freebie through insurance. So, if you’ve got this pump or are considering it, I’ll walk you through how it works, what to watch out for, and my honest thoughts. Stick around—I’ll also share some pros and cons to help you decide if it’s the right pump for you.

(This post was originally a video. Check it out, here!)

---

The Basics

The Evenflo Advanced is marketed as a “hospital strength” pump, but don’t let that term fool you. There’s no regulation for what qualifies as “hospital strength,” so anyone can slap that label on a pump. Spoiler: This is not in the same league as the Medela Symphony or other hospital-grade pumps.

That said, the suction on this pump is decent, and it’s incredibly lightweight. It’s also super budget-friendly—usually free with insurance or around $160 retail. If you’re looking for an inexpensive option, this pump may seem appealing. Let’s break it down!

---

How It Works

Power & Portability

This pump has to be plugged in to use, though you can load it with six AA batteries if you’re desperate for portability. But let me save you some frustration—the batteries will only last about four or five sessions. Not worth it. Just plug it in and consider this a stationary pump.

Settings & Modes

The pump doesn’t follow the typical stimulation and expression modes we’re used to seeing. Instead, it starts on the fastest cycle speed (stimulation mode) and allows you to adjust the suction from there.

• Suction Levels: Suction maxes out at 280 mmHg when single pumping and about 230 mmHg when double pumping, which is on par with higher-end pumps like the Spectra.
  
• Cycle Speeds: The fastest cycle speed is 80 cycles per minute, but it slows significantly as you increase suction, which can make it tough to trigger letdowns at higher levels.

You’ll likely need to alternate between the faster and slower settings during a session to get multiple letdowns, but it’s pretty simple to figure out.

---

The Flange Kit

Okay, let’s talk about the flange situation. This is where the Evenflo pump gets tricky.

• Flange Size: The default flange size is a whopping 30.5mm (huge!), and it comes with a 28mm cushion insert. Both of these are still way too big for most users.
  
• Compatibility Issues: If you’re trying to downsize, good luck. Most aftermarket inserts are made for 24mm flanges, and they won’t fit the Evenflo’s oversized design.

This is a big pain point, but there’s a workaround: You can use tubing adapters to connect the pump to a different flange system, like Spectra or Maymom. Just know that switching flanges may slightly alter the suction.

---

Assembly & Cleaning

The pump’s valve system is a two-piece design that you’ll need to take apart for cleaning. It’s not the most convenient, and the little membrane will likely need replacing every couple of weeks if you’re pumping frequently. The backflow protector is another part to keep an eye on—it’s crucial for keeping milk out of the tubing, and you’ll need to replace it every month or two.

---

Pros & Cons

Pros

• Affordable: Often free with insurance.
• Lightweight: Easy to carry around (even if it’s not truly portable).
• Decent Suction: Comparable to some mid-range pumps.
• Comfortable Suction Pattern: The pump’s suction has a slight dip before release, which feels gentler than a steady pull.

Cons

• Flange Sizing: The oversized flanges are impractical for most users and hard to replace.
• Durability: This pump isn’t built to last. Many users report issues with it breaking down before they’re done pumping.
• Cheap Feel: It’s lightweight but feels flimsy, like something might snap if you’re not careful.
• Noise: While not obnoxiously loud, some users find it noisier than expected.

---

Final Thoughts

The Evenflo Advanced isn’t high on my list of recommended pumps, but it’s not a total flop either. If this is the pump you have, don’t feel discouraged—you can make it work with a little effort and some troubleshooting.

Here’s my advice:

1. Figure Out the Settings: Learn how to alternate speeds and suctions to get the best performance.
   
2. Solve the Flange Issue: Invest in adapters or a different flange system if the default sizes don’t work for you.
   
3. Treat It Gently: This pump isn’t built like a tank, so handle it with care if you want it to last.

Have you used the Evenflo Advanced? I’d love to hear about your experience—what worked, what didn’t, and any tips you’d share with other moms. Drop a comment below!

And if you’re still shopping for a pump, take my free quiz linked below to find the best fit for your needs. Happy pumping!